NIBE VPA Water Heater

Water heater intended primarily to be connected to heat pumps.

VPA is a range of water heaters intended primarily to be connected to heat pumps. They are also suitable for use with other heat sources. There are three sizes, 200/70, 300/200 and 450/300.

The water heater is made up of a hot water cylinder and a double jacket of sheet steel. The hot water cylinder has copper corrosion protection.

The water heaters are designed and approved to current pressure vessel standards.

The insulation of the hot water cylinder consists of polyurethane, which gives excellent thermal insulation.

VPA water heaters are fitted with immersion heater sockets and sensor pockets for control of the hot water heating.

The cold water supply line must be fitted with valve equipment in accordance with current standards.

If the water heaters are heated to more than 65 °C, a mixing valve must be fitted. The highest permitted temperature is 100 °C.

The water heater is made up of a hot water tank, encased by a double jacket of sheet steel. The hot water tank is fitted with copper or enamel corrosion protection on the inside.